• Product
  • Part Of
    Your Team
  • Downloads
    & Services
  • News, Exhibitions
    & Case Studies
  • Access our e-catalogue anytime, anyplace E-Catalogue for iOS and Android
    On the move? You can now view our E-Catalogue on your smartphone or tablet, anytime, anyplace
    Download Pulse for iPad Pulse for iOS and Android
    Pulse gives you the ultimate access to Hager literature on your smartphone or tablet.
  • Follow us on twitter Twitter
    Join in with the #HagerGang by following us on twitter.
    Subscribe to our channel on YouTube YouTube
    Subscribe to our channel to keep up to date with all of our videos.
Download the E-Catalogue for iOS or Android
Give us a call
Download Hager literature
Register to receive our newsletter
Follow @hageruk
Watch our videos on YouTube

KlikLink App

The KlikLink iOS App is used to configure the lighting within a room or multiple rooms.

An introduction:

KlikLCM's (Lighting Control Module) enable the control of an area with up to 4 different control groups. Each group of outputs can control standard switched and/or digital dimmable (DALI/DSI) luminaires. The control module can be connected to up to 4 occupancy sensors and up to 4 wall switch overrides (double retractive, centre off). Any switch or occupancy sensor can be assigned to any output. This is all programmed via the KlikLink App.

How do I download the App?

The KlikLink App is used for LCM configuration and is pre-loaded with the most common room type configuration profiles.
Currently the app is only downloadable on IOS tablets such as iPad's and you can download the app by going to the App store and searching for Hager KlikLink App.
Once downloaded this app will request verification from your LCM which can be found by pressing scan in the top right hand corner.

What settings can be controlled with the App?

  • Presence\ Absence
  • On/Off switching
  • Scene Setting
  • Partition Switch Function
  • Corridor Hold Function
  • Sensor with Integral lux sensor
  • Variable burn in up to 250 hrs
  • 3 level timeout
  • Integral Emergency Test Timers
Further information on the features can be found in the feature tab.

Written instructions manual for the KlikLink App setup:

You can download the full instructions leaflet for the KlikLink App by clicking here. (PDF, 1,2 MB)