Frequently Asked Questions

To save you time, below you will find some of the most common questions and answers we get asked on our technical helpline.
If you don't find the answer you are looking for, you can use our feedback form to submit your question.
What is the largest split load Consumer Unit that you manufacture?
  • VECOS77-10H Insulated Consumer Unit is available with 14 outgoing ways (7+7 split)
  • Two A Boards are also available;
1. JK77-6H Metal Board with 14 outgoing ways (7+7 split)
2. JK1112-10H Metal Board with 23 outgoing ways (12+11 split)
  • VC518C is a 18 way Configurable all Insulated Consumer Unit
  • VH518C is a 18 way Configurable Metal/Insulated Consumer Unit
  • JK1112-10H 23 outgoing ways 12 RCD protected and unprotected
I've lost the instructions for an EG100 and EG103/103E can you send them to me?
  • You can view the EG100 instructions on screen by clicking here
  • EG103/EG103E instructions on screen by clicking here
  • Alternatively, we can e-Mail or FAX the instructions to you in PDF format
  • Please e-Mail your request to the Technical team at technical@hager.co.uk or call the Technical Support line on 0870 607 6677
Where can I find dimensional information for your Distribution Boards?
  • Dimensions of our Boards can be found in the Hager General Catalogue.
  • If you do not have a catalogue, order your copy via our literature request form
What standard are your Circuit Breakers manufactured to?
  • The 'N' range or the 'MTN' range of MCB's are all manufactured to BSEN 60898 and the MCCB's are manufactured to BSEN 60947-2
What is the breaking capacity of your MCB's?
  • 'MTN' range are 6kA (6000 amps), 'N' range are 10kA (10000 amps)
Where can I find out which type of Fuses are in the Fuse Combination Switches so that I can derate them if necessary?
  • Information on the Fuse Combination Switches can be found in the Hager General Catalogue.
  • If you do not have a catalogue, order your copy from our literature request from
Will a 250amp MCCB fit into a JN Panelboard?
  • No, the JN Panelboard will only accept MCCB's up to a maximum of 125amp rating.
  • There are a number of boards available in our Invicta 250 JF range, which will accept outgoing devices rated up to 250A
Do the IP66 Weatherproof Sockets retain their IP rating with the plug in place?
  • Yes, the IP66 Sockets have a lid which clicks over the plug top and socket, thus retaining IP66 rating
Which blanks can be used in the JK range of Distribution Boards?
  • VAS01 blanks are used for both the Distribution Boards and the Consumer Units
Register 
Advanced search
  • ENERGY DISTRIBUTION
    BUILDING AUTOMATION & WIRING ACCESSORIES
    SECURITY
    SERVICE
     
    Hager
    Counterfeiting
    Contact
     
    Policies
    Terms & Conditions