Switch Disconnectors & Switch Fuses
Our range of switch disconnectors are available as 20-800A TP&N & TP&SN enclosures, as well as IP65 rated at 10-80A TP&N enclosures. We also offer a range switch fuses to compliment the range.
Introduction
Our range of switch disconnector has been designed
to complement the FCS, TPN and panelboard ranges
by providing individual protection and control of
individual circuits up to 800A.
The enclosures have been designed to provide
adequate cabling space without the need for
additional cable spreader boxes.
Operation of the device is through a door mounted
rotary handle which is mechanically interlocked
to prevent access to live conductors when the
switch is in the on position. The handle is also
padlockable in the off position.
The hager range of switch disconnectors further
complements the existing commercial range giving
a range of enclosed switch disconnectors to IP65
for individual isolation.
The IP65 devices are padlockable in three positions
and offer plenty of cabling space. Clip on auxiliary
contacts can be fitted retrospectively.
Our 20 - 800A switch disconnectors comply to
BS EN 60947-3 IP31 standards.
Our 10 - 80A IP65 switch disconnectors comply with
BS EN 60947-3 IP65 to BS EN 60529 standards.
Both 20-800A and 10-80A switch disconnectors have utilisation categories:
AC-21
AC-22
For more information:
to complement the FCS, TPN and panelboard ranges
by providing individual protection and control of
individual circuits up to 800A.
The enclosures have been designed to provide
adequate cabling space without the need for
additional cable spreader boxes.
Operation of the device is through a door mounted
rotary handle which is mechanically interlocked
to prevent access to live conductors when the
switch is in the on position. The handle is also
padlockable in the off position.
The hager range of switch disconnectors further
complements the existing commercial range giving
a range of enclosed switch disconnectors to IP65
for individual isolation.
The IP65 devices are padlockable in three positions
and offer plenty of cabling space. Clip on auxiliary
contacts can be fitted retrospectively.
Our 20 - 800A switch disconnectors comply to
BS EN 60947-3 IP31 standards.
Our 10 - 80A IP65 switch disconnectors comply with
BS EN 60947-3 IP65 to BS EN 60529 standards.
Both 20-800A and 10-80A switch disconnectors have utilisation categories:
AC-21
AC-22
For more information: