Contact Us
Download the E-Catalogue for iOS or Android
Give us a call
Download Hager literature
Register to receive our newsletter
Follow @hageruk
Watch our videos on YouTube
 
Consumer Unit Surge Protection Kit

We now provide a surge protection kit that can be fitted to any of our consumer units to meet Amendment 1 of the 17th Edition.
Surge Protection KitThe surge protection devices in the kit offer type 2 protection to the BS EN 61643 standard, to ensure conformity with the current edition of BS 7671.

Amendment 1 of the 17th Edition requires electricians to conduct a risk assessment of properties to see if they require surge protection.

When you consider that many homes have a lot of sensitive electronic equipment, such as TVs, Hi-Fis, PCs and printers that would be adversely affected by a voltage surge, then the need for such devices increases.

Transient overvoltages are not just caused by a direct lightning strike, a nearby strike, within a kilometre, can cause substantial damage. Other causes can be fluctuations in the power supply or from equipment such as microwaves or showers being switched.

Our surge protection kit can prevent the spread of overvoltages in electrical installations and protect the equipment connected to it. It is characterised by an 8/20us current wave.
To find out more about our full range of Surge Protection Devices and the Consumer Unit Kit download the catalogue pages.

Guide to Surge Protection Devices
To help you to understand surge protection further we have created a Guide to Surge Protection Devices (PDF, 2,3 MB), this is available to download or order from our website.
Installation
Installation video
Take a look at how easy the kit is to install in this installation video.

For further installation information download the installation instructions.
Switch Disconnectors

The new range of modular on load disconnector switches 16-125A are now available, designed to suite with our MCB range.
Switch Disconnector
All incorporate fast ON & OFF operation. The new switches are compatible with all the existing accessories such as phase barrier shield and terminal shrouds. The new range will supersede the existing SB and SF modular switches and change over switches, they are backwardly compatible with current systems.

Now also available...

Enclosed MCCBs
Our new range of Enclosed MCCBs are now available, for further details download the catalogue pages.

Dimmers
The new range of modular EVN dimmers are now available which provide enhanced detection and control of loads. Download the catalogue pages for more information.

800A Panelboards
The 800A MCCB incomer board is designed specifically for applications where an adjustable 800A MCCB incomer device is required. Download the catalogue pages for further information.