|Safety covers available for lampholders & pendant sets|
We've extended our Lamp holder and Pendant range with the introduction of the new Safety Cover versions. The addition of a safety cover, which simply clips over the ceiling rose base allows decorators to remove the outer ceiling rose to paint as close to the accessories as possible, while protecting them from live wires.
|Digital Adoption Survey|
Our original Digital Adoption Survey ran in 2011 with great success, now 4 years later we have run the same survey to monitor the progression of digital trends within the industry, take a look below to see some of the highlights.
|Amendment 3 Frequently Asked Questions|
Changes have been made to the wiring regulations BS 7671 with Amendment 3 which was published in January 2015. One of these changes involves consumer units installed in household premises and is focused on the material their enclosures are manufactured from. Here you can see a number of frequently asked questions surrounding the Amendment.
|Lighting up the future|
How prefabricated lighting adapts to evolving buildings.The last few years have been unpredictable for the construction sector, and while the recession continues to affect market trends and demands, signs of hope are emerging. Here Steve Dyson, Market Manager at Hager UK discusses pre-fabricated lighting systems and how they play an integral role in future proofing multi-functional buildings.
| The evolution of pre-fabricated lighting distribution|
Stephen Dyson, Market Manager at Hager UK, gives us an insight into how Klik was created and has continued to change the industry.
|Get your business seen by thousands of new customers, with Hager!|
Give your company the exposure it deserves with our exciting and exclusive competition!
|Klik LCM is first degree for new Aylesbury Centre|
A £13.5m development, set to be the first facility in Aylesbury to offer degree-level courses, has recently completed the installation of a full lighting control system from Hager in conjunction with main contractor Morgan Sindall plc and award winning electrical engineering company, Darke & Taylor.
|Hager BIM Models are now available. |
Using Autodesk Revit 2013 our BIM models have been created in a simplified graphical representation, to minimise file sizes when used in large BIM projects.
|PBM Competition to go to Assen 2015|
We are running an exclusive opportunity to offer one lucky #HagerGang member the chance to join Hager employees on a trip to Assen to watch the British Superbikes on Sept, 18th - 21st.
|Our new Specification Team|
This strategic move will enable us to support customers in providing a solution-based offering that is tailored to their requirements and backed up by the company’s wealth of technical expertise.
|The Importance of Training in the Electrical Industry|
In an increasingly evolving market, all electrical installers should be investing time in training according to Paul Collins, Project & Technical Support Manager at Hager UK
|Pulse App for iOS|
Pulse gives you the ultimate access to Hager literature. Whether you simply want to browse through our catalogues and brochures or propose a solution to your customer, Pulse will allow you to present yourself, and your solution in an attractive and intuitive way.
|The Design 30 interactive tool!|
A new interactive tool has gone live on hager.co.uk enabling you to view individual features and benefits of a Design 30 Amendment 3 Consumer Unit.
|A metal solution, designed with installers in mind!|
Steve York, Residential Market Manager at Hager UK discusses how Hager UK used the latest legislation to fuel the design of its metal consumer unit range in order to make the lives of electricians easier.
|Hager - Insulated vs Metal consumer unit|
The following video shows an insulated consumer unit and a Hager metal consumer unit being subjected to an internal hot-wire test. The hot-wire test principle assisted in the development of Regulation 421.1.201 and in particular, illustrates why ferrous metal e.g steel, was deemed to be an example of a non-combustible material for the consumer unit enclosure.