•  
  • Product
    Catalogue
  • Engineered
    Solutions
  • Downloads
    & Services
  • News, Exhibitions
    & Case Studies
  • Access our e-catalogue anytime, anyplace E-Catalogue for iOS and Android
    On the move? You can now view our E-Catalogue on your smartphone or tablet, anytime, anyplace
    Download Pulse for iPad Pulse for iOS and Android
    Pulse gives you the ultimate access to Hager literature on your smartphone or tablet.
  • Follow us on twitter Twitter
    Join in with the #HagerGang by following us on twitter.
    Subscribe to our channel on YouTube YouTube
    Subscribe to our channel to keep up to date with all of our videos.
Filter referenceces
  • Building Types

  • Product Groups

Download the E-Catalogue for iOS or Android
Give us a call
Download Hager literature
Register to receive our newsletter
Follow @hageruk
Watch our videos on YouTube
 

Flying Start

KNX Bus System Secures Family Centre for Vale of Glamorgan Council

Vale of Glamorgan county council is using Hager’s KNX bus system to provide an intelligent security solution for its Flying Start family centre in Barry.

The social services’ building is in the middle of a housing estate and provides support for local families and their children.

Using the KNX bus system, Hager’s solution combines the building’s intruder alarm system with shutters that secure all of the windows and doors.

Staff in the reception area can operate certain groups of shutters, while shutters in individual rooms can be opened and closed using local switches. Any shutters that are left open at the end of the day will be closed when the intruder alarm is set.

Deactivating the intruder alarm will also raise the security shutters over the main entrance to allow entry and also all of the shutters over emergency exits for safety.

Hager’s Tebis bus system communicates with other manufacturer’s KNX products via a single twisted pair cable, radio frequency, a power line or via IP/Ethernet. The system avoids the multiple cabling that would be needed from alternative systems and is easily changed without the need for new cabling.

Hager has also supplied all of the electrical distribution boards for the building and the lighting installation and control using its klik 7 pin.

The lighting control design maximises energy savings from the centre. In areas where there is natural light available, the klik 7 pin occupancy sensors have an integral photocell so that the lights can dim up and down in response to both presence detection and also any natural light that is available from windows. In rooms without natural light the luminaires will switch on and off in response to simple occupancy sensors.

While klik 7 pin can be incorporated into a KNX system, using a KNX version of its occupancy sensor for added control, in this instance it has been used as a standalone system.

Products

tebis.KNX offers the technology to realise true energy savings through automation. Maximum energy savings are achieved where the system controls digital lighting and heating. In addition, by using daylight linking PIR devices to dim lighting in response to natural light availability, energy saving ...