•  
  • Product
    Catalogue
  • Engineered
    Solutions
  • Downloads
    & Services
  • News, Exhibitions
    & Case Studies
  • Access our e-catalogue anytime, anyplace E-Catalogue for iOS and Android
    On the move? You can now view our E-Catalogue on your smartphone or tablet, anytime, anyplace
    Download Pulse for iPad Pulse for iOS and Android
    Pulse gives you the ultimate access to Hager literature on your smartphone or tablet.
  • Follow us on twitter Twitter
    Join in with the #HagerGang by following us on twitter.
    Subscribe to our channel on YouTube YouTube
    Subscribe to our channel to keep up to date with all of our videos.
Filter referenceces
  • Building Types

  • Product Groups

Download the E-Catalogue for iOS or Android
Give us a call
Download Hager literature
Register to receive our newsletter
Follow @hageruk
Watch our videos on YouTube
 

Birchin Court

Intelligent Lighting System for Central London Office

We have supplied an intelligent and adaptable lighting system for the renovation of a Central London office; by combining klik 7 pin lighting installation and tebis.KNX.

Designed by Concept Design 95 Ltd, the 7740 sq. ft. open plan office on the fourth floor of Birchin Court has recently undergone a total refurbishment. Using our prefabricated wiring system, klik 7 pin, GT Electrics Ltd was able to save approximately 50% on lighting installation time, when compared to standard wiring systems. In addition, by using ‘plug and play’, the prefabricated wiring allows the lighting configuration to be easily changed to suit the needs of future tenants.

Guy Tayler, managing director of GT Electrics Ltd comments: “We chose Hager’s klik 7 pin due to the speed of installation. The system has pre-tested cables, meaning less time on site; whilst the colour coded plugs allowed our electricians to easily identify which particular circuit the cables run to.

“Another advantage of the klik 7 pin is the multi-pin plugs, which allow dimming, as well as 230V power to each light fitting.”

There are three entrances to the office at Birchin Court. Luminaires are grouped together using klik marshalling boxes and are controlled by a sensor, combining occupancy detection with daylight harvesting. The tebis.KNX bus links the occupancy sensors, switches and KNX actuators to allow control of the lighting circuits. The alternative hard-wired solution would involve running cables to a switch – this is both labour intensive and inflexible if there are any changes or additions.

Our tebis.KNX system allowed GT Electrics to programme the lighting to create a corridor of light when presence is detected in any of the three entrances, which is especially suitable for the night security guards and late workers. Each sensor can be programmed to be a master and a slave, meaning if a sensor detects presence it will switch on its lights, and it will also communicate with adjacent sensors so that the entire corridor is lit.

Other control includes a time clock, to allow the lighting to turn on and off at pre-set times. At night, the lighting is set to a 10% dimmed level for improved energy efficiency.

Guy Tayler adds: “Compared to standard light switches, the Hager tebis.KNX system allows for flexible use of the lighting. The system can be easily programmed and re-programmed in the future, as the office layout is altered.

“The Hager engineers came to site both during and after installation to check there were no issues. Using Hager’s klik 7 pin with tebis.KNX has been a good investment, saving us time and the associated costs on installation.”

Videos

See how GT Electrics Ltd used klik 7 pin and Tebis KNX to save time on installation time at Birchin Court.

Products

tebis.KNX offers the technology to realise true energy savings through automation. Maximum energy savings are achieved where the system controls digital lighting and heating. In addition, by using daylight linking PIR devices to dim lighting in response to natural light availability, energy saving ...