Consumer Units
The Hager consumer unit was developed with a strong aesthetic design in anticipation of Part M of the building regulations in addition to integrating other unique features as a result of feedback from homeowners, electrical contractors and house builders.
Introduction
Through in depth research with contractors, we have incorporated
a number of innovative features that enable time saving and easy
installation. Multiple fixing points, no restrictions under the DIN rail
and cable entries positioned for easy access to devices, all add up to
a spacious unit which is quick and easy to install.
Our consumer unit offer is comprised of our:
Surface Mounted Consumer Unit - Designed to compliment &
integrate. Whether used to house electrical distribution or
smart control devices, the units colour and form have been
designed to complement and integrate into its surroundings.
Flush Consumer Unit - Faster, safer, stronger installation. Our range
of flush fit consumer units are up to 25 percent faster to fit in both
solid and partition walls. For partition walls, a flange and frame
clamps the unit to the wall.
There is no need for separate fixing, the unit simply slots into the
prepared hole and the integral fixing screws are tightened. With
solid and brick walls, the installer refits the flange to the sides of
the back box and uses it as a fixing bracket to secure the base unit
to the wall.
Garage Units - Available as IP30 & IP55, our range of garage units comply
with BS EN 60439-3 Annex 2A. They come pre-configured for one power
(32A) and one lighting (6A) circuit.
You will find it easy to order products
from our consumer unit range using the
Consumer Unit catalogue.
a number of innovative features that enable time saving and easy
installation. Multiple fixing points, no restrictions under the DIN rail
and cable entries positioned for easy access to devices, all add up to
a spacious unit which is quick and easy to install.
Our consumer unit offer is comprised of our:
Surface Mounted Consumer Unit - Designed to compliment &
integrate. Whether used to house electrical distribution or
smart control devices, the units colour and form have been
designed to complement and integrate into its surroundings.
Flush Consumer Unit - Faster, safer, stronger installation. Our range
of flush fit consumer units are up to 25 percent faster to fit in both
solid and partition walls. For partition walls, a flange and frame
clamps the unit to the wall.
There is no need for separate fixing, the unit simply slots into the
prepared hole and the integral fixing screws are tightened. With
solid and brick walls, the installer refits the flange to the sides of
the back box and uses it as a fixing bracket to secure the base unit
to the wall.
Garage Units - Available as IP30 & IP55, our range of garage units comply
with BS EN 60439-3 Annex 2A. They come pre-configured for one power
(32A) and one lighting (6A) circuit.
You will find it easy to order products
from our consumer unit range using the
Consumer Unit catalogue.
Surface Mounted Features & Benefits
Flush Features & Benefits
