Occupancy Sensors
Our range of occupancy sensors provide a simple and cost effective means of controlling light levels. Perfect for use in office blocks, universities and all kinds of commercial applications.
Features & Benefits
Standard Occupancy Sensors
The EEK513W uses passive infra-red technology to detect the movement of infra-red emissions given off by somebody moving within the detection area of a sensor.
This movement will cause the activation of the sensor. This activation can be overridden when there is sufficient levels of ambient light available via use of a photocell.
Commissioning of the EEK513W is achieved with the EEK001 Installer remote control, or alternatively limited control can be achieved by using the potentiometers positioned behind the protective shutter on the front of the unit to set the time out period and the lux level.
This movement will cause the activation of the sensor. This activation can be overridden when there is sufficient levels of ambient light available via use of a photocell.
Commissioning of the EEK513W is achieved with the EEK001 Installer remote control, or alternatively limited control can be achieved by using the potentiometers positioned behind the protective shutter on the front of the unit to set the time out period and the lux level.
Digital Occupancy Sensors
The EEK523W uses passive infra-red technology to detect the movement of infra-red emissions given off by somebody moving within the detection area of a sensor. This movement will cause the activation of the sensor.
The EEK523W will control up to 24 digital ballasts to maintain the required light level by adding artificial light to the natural light in the available area. The unit will automatically detect if the digital load is DSI or DALI and control accordingly.
Commissioning of the EEK523W is achieved with the EEK001 Installer remote control, or alternatively limited control can be achieved by using the potentiometers positioned behind the protective shutter on the front of the unit to set the time out period and the lux level.
The EEK523W will control up to 24 digital ballasts to maintain the required light level by adding artificial light to the natural light in the available area. The unit will automatically detect if the digital load is DSI or DALI and control accordingly.
Commissioning of the EEK523W is achieved with the EEK001 Installer remote control, or alternatively limited control can be achieved by using the potentiometers positioned behind the protective shutter on the front of the unit to set the time out period and the lux level.
